Foundation Pier Installation in Tulsa

Stabilize and lift settling slab foundations

When part of a slab home is sinking, the long-term fix is usually to transfer the weight of the house past the unstable clay to deeper, load-bearing soil or bedrock. That's what foundation piers do.

Steel push piers

A steel bracket is attached to the footing, and sections of steel pipe are hydraulically driven down using the weight of the house as resistance until they hit refusal. The house is then lifted toward level and the load is locked onto the piers. Push piers suit most average-to-heavy brick homes in the Tulsa area.

Helical piers

Helical piers are steel shafts with screw-like plates that are turned into the ground to a measured torque, which correlates to load capacity. They don't rely on the home's weight, so they work well for lighter structures, porches, additions, and new construction.

Pressed concrete pilings

Some contractors still use stacked concrete cylinders pressed into the soil. They cost less per unit but typically don't reach the same depth as steel. Ask how deep they'll go and what the warranty covers.

What a good pier proposal includes

• A drawing showing where each pier goes and why
• Pier type, expected depth, and installation method
• Expected lift and an honest note that full level may not be possible without damage
• Before-and-after elevation readings
• Warranty terms and whether they transfer to a buyer
• Who handles permits, landscaping, and plumbing tests

Related Foundation Repair Topics

Frequently Asked Questions